Glitch Invisibolt Build Guide

Below is a build guide for the Glitch, but this guide is similar to other boards we sell that are bolt less tops as well. 

Important: This guide assumes you have already assembled the plate (if you are using a plate) to the PCB. Don't forget the stabilizers before the plate too.  

Tools Needed:
  • Small Phillips screwdriver
  • Flush cutters or scissors
  • Tweezers- for grabbing and positioning gaskets and the double sided tape
  • Rubber gloves- to help avoid finger prints
  • Glasses cleaner or similar- to help kill static and clean layers right after peeling
  • Clean Microfiber cloth
Helpful Hints and Tricks:
  • Have a nice and clean workspace. The translucent colors love to show all sorts of dust, hair, and other things.
  • Wearing rubber gloves cuts down on fingerprints. Pro tip is to do all the peeling first, then change your gloves so you can clean the layers as you place them.
  • Using glasses cleaner or similar by spraying it on a microfiber cloth and wiping each layer down right after peeling does a great job of killing static and cleaning the layers.